new
Kalolary Scientific Lab Jack-100 x 100mm Stainless Steel Lab Stand Table Rack Scissor Lab-Lift Lifter for Science Experiment
Kalolary Scientific Lab Jack-100 x 100mm Stainless Steel Lab Stand Table Rack Scissor Lab-Lift Lifter for Science Experiment
Kalolary Scientific Lab Jack-100 x 100mm Stainless Steel Lab Stand Table Rack Scissor Lab-Lift Lifter for Science Experiment
Kalolary Scientific Lab Jack-100 x 100mm Stainless Steel Lab Stand Table Rack Scissor Lab-Lift Lifter for Science Experiment
Kalolary Scientific Lab Jack-100 x 100mm Stainless Steel Lab Stand Table Rack Scissor Lab-Lift Lifter for Science Experiment
Kalolary Scientific Lab Jack-100 x 100mm Stainless Steel Lab Stand Table Rack Scissor Lab-Lift Lifter for Science Experiment

Kalolary Scientific Lab Jack-100 x 100mm Stainless Steel Lab Stand Table Rack Scissor Lab-Lift Lifter for Science Experiment

  • √Material: Made of high quality stainless steel, strong and durable,corrosion resistant and lift very steadily.
  • √Dimensions: 4 inches x 4 inches (100x100mm).Expandable height range is 1.8"/45mm (lowest) to 5.9"/150mm (highest).
  • √Application: It is widely used as a supporting instrument to adjust height of objects such as alcohol burner and so on in chemistry, physics and other scientific objects. Or in home daily usage.
  • √How to use: Rotating the hand wheel to lift the front panel that you can adjust the desired height.Adjustment knobs provide smooth and accurate height adjustment, easy to operate.
  • √Maintenance: It should be kept clean and stored in a cool, dry, non-corrosive gases after use.

Color:

£14.99
Check Price On amazon Add to amazon basket When you order through the above link, we may earn a commission at no additional cost to you. Prices shown may vary at checkout. Please check the final price before completing your purchase.

Best Prices

Secure Checkout

Top Customer Ratings

Buy with Confidence

Safe and Secure

13 reviews
Lee Smart
Very nicely made bit of kit. Scissor action is very smooth - will see over time if it stays that way. May need a little grease but first impressions are very positive. As the knob is wound clockwise, the top and bottom are forced apart smoothly. The nature of a scissor design means that the spread is not linear - at the start, from minimum separation, there is more movement per turn of the knob than at the end. This is a good thing!! The effect is that it's quick to lift but there is very fine control at the extreme height. Just what I wanted to lift my router in my home-made router table. I mounted my lifter on a couple of blocks with pan-head screws overlapping the edges. Some mounting holes would have been better but this has done the trick for me. There are foam circles stuck to one surface (the bottom) as feet but otherwise, top and bottom are identical and the lifter can be mounted either way up (mine is feed-upwards in fact).
Read more
Mr. J.
I purchased this to use under a router on a table to fine adjust the router bit height. I thought it would have been bigger, but as I can use metric and imperial measurements with ease, I probably confused myself a bit. It wouldn't lift the router against its internal plunge spring. I cured the problem by stripping the router down and cutting the spring and stretching it. It worked and it lifts the router through the table bed and I can lock the router off at what ever setting I wish. A larger jack would not have fit, so every thing worked out fine in the end. Its strong enough as long as only a vertical load is placed on it.
Read more
Ade
Bought this for my mini CNC machine which I can optionally fit a laser to. The laser module I have has a fixed focus, so the laser much be positioned at a specific distance from the piece to be cut or marked. This little lift can be clamped to the bed, the piece attached (or placed on it) and then the height adjusted so that the laser is the correct distance from the part. It's reasonably well made, time will tell, but I'm happy enough for what I paid.
Read more
Ace
Used as a router lifter , Found the mechanism is not strong enough to lift my router ( does have a strong spring ) But will hold and lower fine ,
Read more
Miles C.
Required a lift to adjust the router in my router table...this ticks all the boxes.It is well made in stainless steel and does the job brilliantly. Than you. Regards Miles
Read more
Garrett aka Gary Goggin
Beautifully made & finished. But much to small & light for the purpose that I needed it for! Returned it to Amazon & immediately bought a really nice, much more Heavy Duty Scissor Lift Jack, needed to gently raise each corner of a Heavy Double Bed. Raised all four corners in turn to independently place the 4x 4inch Spacers underneath each of the 4x feet on the bed. “Et Voila”! A much needed space to slide my New Linear Foldable Treadmill in, to safely store it completely under the Bed! The ultimate space saving solution & the Treadmill can easily be slid back out on its wheels for each Walking Workout when needed! MUCH BETTER THAN WALKING OUTSIDE IN THE COLD FREEZING RAIN!!!
Read more
Ed Teache
Bought this to use as a height adjuster for my router/router table (cheap Work Zone model.) I could see the potential but was unable to turn the star knob because of clearance, size and the excessive force needed to turn the knob. The knob is a left hand thread which didn't help. I found these turnbuckles (TURNBUCKLE WIRE STRAINER TENSIONER HOOK - EYE BZP ZINC PLATED 6MM ( pack 3 )) going for £1.89 on Amazon, dismantled one and fitted it in place of the star knob. (Turnbuckles have a left and right hand thread on either end.) I then mounted the table onto 4 x 50mm blocks of wood which in turn were mounted on a piece of ply. The blocks give me clearance to fit the lab stand under the router and the extended 'knob' makes turning the raising screw a doddle. Now I can adjust the router to the mm.
Read more
Anca
Overall i am very happy with this purchase, item exactly as expected although could have done with it being a bit heavier/sturdier. Not a deal breaker though and it still fits the purpose at a good price
Read more
Mattia Saccoccio
good quality product, well greased, excellent price - would buy it again! they won't go up and down as easily as the top brands (costing 5-10 times more), which might be a problem for very heavy (multi kg) objects, but we bought 5 of the small ones (100x100) and given the very generous amount of grease they do their job very well.
Read more
Filip Hedlund
Utmärkt
Read more
alex
per quello che serve a me e molto camodo perfetto
Read more
Lucas Van de paer
Zeer goed product, gebruik ik als lift voor tafelfrees. Werkt goed
Read more
Client d'Amazon
Très bien pour lever une défonceuse sous table Fait le job
Read more
  • Manufacturer ‎Kalolary
  • Part number ‎K-L040
  • Item Weight ‎500 g
  • Package Dimensions ‎15.1 x 10.8 x 5.4 cm; 500 g
  • Manufacturer reference ‎K-L040
  • Material ‎Stainless Steel
  • Item Package Quantity ‎1
  • Batteries included? ‎No
  • Batteries Required? ‎No
  • ASIN B07F3LPF5C
  • Customer Reviews 4.2 4.2 out of 5 stars 358 ratings var dpAcrHasRegisteredArcLinkClickAction; P.when('A', 'ready').execute(function(A) { if (dpAcrHasRegisteredArcLinkClickAction !== true) { dpAcrHasRegisteredArcLinkClickAction = true; A.declarative( 'acrLink-click-metrics', 'click', { "allowLinkDefault": true }, function (event) { if (window.ue) { ue.count("acrLinkClickCount", (ue.count("acrLinkClickCount") || 0) + 1); } } ); } }); P.when('A', 'cf').execute(function(A) { A.declarative('acrStarsLink-click-metrics', 'click', { "allowLinkDefault" : true }, function(event){ if(window.ue) { ue.count("acrStarsLinkWithPopoverClickCount", (ue.count("acrStarsLinkWithPopoverClickCount") || 0) + 1); } }); }); 4.2 out of 5 stars
  • Best Sellers Rank 42,958 in Business, Industry & Science (See Top 100 in Business, Industry & Science) 46 in Lift Tables
  • Date First Available 29 Jun. 2018